Handhelds

 
Casio IT-3000 Accessories
DT-9723LI
  Battery Pack
   
  Lithium-ion rechargeable battery pack
7.4V 2,200 mAH.
HA-B61IO
  Bridge Satellite Cradle
   
  This cradle allows communication between the terminal and a PC via RS-232C or USB interface. Using the optionally available Wall Mount Unit, it can be installed on a wall. The dedicated AC Adaptor (AD-S42120AE) is required to power the cradle.
HA-B30CHG
  Cradle-type Battery Charger
   
  This battery charger allows the battery pack installed in the terminal to be charged without removing it. The dedicated AC Adaptor (AD-S42120AE) is required to power the charger.
HA-B80AX
  Serial Cross Cable to IT-3000
   
  This cable is connected to 8 pin serial connector located at the right side of IT-3000, and can be used for ActiveSync with your PC.
Click the picture to display the pin layout.
DT-9020ADP-U
  AC Adapter for IT-3000
   
  Input 120VAC, 60Hz 16W
Output 9.5VDC 1000mA
AD-S42120AE
  AC Adapter for the Cradle
   
  Input 100 to 240VAC, 50/60Hz 1.3-0.7A
Output 12VDC 3.5A
HA-B90DCV
  Screen Protect Cover
   
  This cover gives an extra protection from scratch and damage for the screen panel while the terminal is not in use.
HA-B92PCV
  Splash Protect Cover
   
  Attaching this cover to the terminal lets you use it under inclement weather.
Not Available Yet
HA-B93PH
  Formed Sheet Paper Holder
   
  This paper holder consisting of four parts and four screws is used when printing on a formed sheet paper. It will give you an insertion guide to load formed sheet paper.
Not Available Yet
HA-B34AT
  Car Mount Unit for HA-B30CHG
  With this option and the Cradle-type Battery Charger (HA-B30CHG) assembled together it forms "Car Mount Battery Charger". The battery charger can be installed in a vehicle for charging the battery pack installed in the terminal without removing it. Car Power Cable (DT-827CAC) is required to power the charger.